AT Sports
CushionX Product Submittal — Generic Package
Ready to send — no project details
Indoor courts finished with an AT Sports surface system
AT Sports
Edition 2026
Product Submittal Package · CushionX

Cushioned Sports
Surface System

Product Submittal Package

Product submittal information.

Product / systemCushionX Cushion Surface System
ManufacturerAT Sports, Inc. · 189 Etowah Industrial Court, Canton, GA 30114
Phone770-734-3000
Websiteatsports.com
Specification sectionAthletic Surfacing — for use under the project’s athletic surfacing section
Contents
Introduction03
Why CushionX04
Manufacturer Qualifications05
System Build06
Performance07
Acrytech Finish — Court Pace08
Substrate Evaluation09
Acrytech Chemistry & VOC10
Project Reference — Stanford11
Case Study — Pickleball Facilities12
Collegiate & Club Facilities13
Technical Support14
Warranty15
Contact16
Technical Appendices17

Technical data sheets, safety data sheets, warranty and supporting documents are listed in the Technical Appendices and attached to this submittal.

Acrytech drums and silica sand staged in the AT Sports warehouse, Canton, Georgia
Acrytech products staged for shipment at the AT Sports facility in Canton, Georgia.
AT Sports
Introduction

Submitted for
specification review.

AT Sports submits the CushionX Cushion Surface System for review under the athletic surfacing section. CushionX is a recycled-rubber cushion layer finished with Acrytech acrylic color coatings, for tennis, pickleball and multi-sport courts.

This package contains the product data, system build, test data, installation guidance and warranty documentation needed to evaluate the system against a project specification. Technical and safety data sheets are attached in the Technical Appendices.

AT Sports formulates, manufactures and supports its surfacing systems in Canton, Georgia, so questions on product data, substrate conditions or substitutions go directly to the manufacturer.

Signature of Brad Carroll
Brad Carroll
President, AT Sports
Requested Action

List CushionX by AT Sports, Inc. as an approved manufacturer, or accept it as an approved equal to the basis-of-design product.

Red and blue pickleball court finished in the AT Sports warehouse, with stacked Acrytech drums behind it
Acrytech-coated court in the AT Sports warehouse, Canton, Georgia.
AT Sports
Why CushionX

A complete surface system,
documented and supported.

CushionX combines a cushion layer and an acrylic playing surface into one specified system, manufactured and supported by AT Sports, for tennis, pickleball and multi-sport courts where player comfort matters.

01

Cushioned Comfort

A recycled-rubber cushion layer adds shock absorption and comfort underfoot beneath the playing surface.

02

Thickness Options

CushionX rolls are available in 4mm, 6mm and 8mm thicknesses to match the level of cushion the project requires.

03

Acrytech Finish

Finished with Acrytech acrylic color coatings, ITF classified for court pace under Category 3 and Category 4.

04

Manufacturer-Direct Support

Direct access to AT Sports technical, product-development and production resources before, during and after installation.

One manufacturer.Cushion to finish coat.One documented system.
Indoor courts finished with CushionX and Acrytech
AT Sports
About AT Sports

Manufacturer qualifications.

AT Sports, Inc. has formulated and manufactured sports surfacing systems in Canton, Georgia since 1995. One company is responsible for the CushionX system from raw material to finished court.

1995
Founded
30+ years
Manufacturing experience
Canton, GA
Manufactured in the USA
ASBA
Member since 2015
Member, American Sports Builders Association
Single-source responsibility

All system components are formulated, manufactured and quality-controlled by AT Sports.

Batch traceability

Every batch is tied to a documented production run and color-matched to a reference standard before release.

Published documentation

Three-part guide specification, TDS, SDS, application instructions, maintenance guide and limited warranty.

Technical support

System specification, application guidance, field troubleshooting and post-installation assistance from the manufacturer.

Batch-numbered production sample jars
Batch-numbered production samples
Color matching board compared against reference standards
Color matching against reference standards
AT Sports
System Build

The CushionX
cushion system.

A recycled-rubber cushion layer bonded to the substrate and finished with the Acrytech acrylic coatings system.

The cushion layer adds shock absorption and comfort underfoot, while the Acrytech finish provides the color, texture and court pace of the playing surface.

Cushion Thickness Options
4mm
Rubber roll
6mm
Rubber roll
8mm
Rubber roll
Typical use by thickness
Indoor courts finished with a cushioned acrylic surface
Cushion system finished with Acrytech color coatings.
Finished Playing Surface
Line paint per court layout
Acrytech Color
Textured color and finish coats
Acrytech
Acrytech Resurfacer / Fill Coats
Seals and fills the cushion surface
Coat count to confirm
Acrytech
CushionX Rubber Rolls
4mm · 6mm · 8mm recycled raw rubber
CushionX
Adhesive
Bonds the cushion layer to the substrate
Product to confirm
Prepared Substrate
Asphalt or concrete, repaired and primed per specification

System build, top to substrate

AT Sports
Performance

Comfort you can measure.

CushionX performance is measured on the finished surface: how much impact the system absorbs, how it responds underfoot, and how the ball plays off the Acrytech finish.

Force Reduction
—%

Shock absorbed by the surface compared with concrete.

Test value · by thickness
Vertical Deformation
—mm

How much the surface gives under an athlete’s foot.

Test value · by thickness
Ball Rebound
—%

Consistency of vertical ball response across the court.

Test value · by thickness
Surface Friction
—

Dry and wet traction of the finished playing surface.

Test value · by thickness
Acrytech Finish
ITF Recognized
Category 3 & Category 4

The CushionX playing surface is finished with Acrytech color coatings, recognized by the International Tennis Federation for court pace under Category 3 (Medium) and Category 4 (Medium-Fast).

Confirm ITF classification applies over cushion
Court 16 indoor tennis facility with a CushionX and Acrytech surface
8mm CushionX with an Acrytech finish, Court 16 Brooklyn.
AT Sports
Court Pace

Two profiles.
Matched to the court.

35–39CPR
ITF Classified Court Pace badge — Category 3, Medium
Level 3Medium
ITF Category 3 classification range
Typical Applications
Recreational and club tennis · pickleball · multi-sport courts
40–44CPR
ITF Classified Court Pace badge — Category 4, Medium-Fast
Level 4Medium-Fast
ITF Category 4 classification range
Typical Applications
Competition, collegiate, player-development and indoor tennis

Acrytech Color is configured to the Medium or Medium-Fast profile through controlled aggregate selection and loading during batching.

Independently Tested
ITF Recognized
Acrytech Color Coatings · Category 3 & Category 4

Acrytech color coatings are officially recognized by the International Tennis Federation (ITF) under both Category 3 and Category 4.

This recognition confirms our coatings meet ITF performance standards for pace, bounce and playing characteristics.

Published Acrytech Color Profiles · Aggregate + Loading
Level 3 / MediumAFS-55· 200 lbs
Level 4 / Medium-FastAFS-60· 150 lbs

The court-pace profile for each project is set in the system specification. Where a project calls for a specific CPR target, AT Sports confirms the aggregate profile and application before production. Additional published profiles are available.

AT Sports
Substrate & Court Evaluation

Performance starts
below the coating.

The performance of an acrylic court surface depends on the condition and preparation of the substrate beneath it.

AT Sports maintains technical guidance addressing concrete design, curing, moisture, preparation and primer compatibility before acrylic coatings are installed.

Moisture Evaluation

AT Sports technical guidance references ASTM F1869 and ASTM F2170 methods for evaluating concrete moisture conditions.

Technical Considerations
01Concrete cure
02Moisture migration
03Vapor barriers
04Surface profile
05Efflorescence
06Contamination
07Depressions
08Crack conditions
09Primer compatibility
AT Sports crew assessing and preparing a worn tennis court substrate on site

On-site substrate assessment and surface preparation ahead of an acrylic coating system.

The surface system begins with understanding the surface below it.

AT Sports
Product Responsibility

Documented
product chemistry.

Acrytech Color
100% acrylic latex
Self-crosslinking technology
42 g/L
Published VOC
Acrytech Resurfacer
100% acrylic latex
Self-crosslinking technology
43 g/L
Published VOC
Acrytech Color — Contains No
—Asbestos
—Lead
—Mercury
—Heavy metals
—PCB
—Formaldehyde

Product information from the published Acrytech Color Technical Data Sheet.

AT Sports technician mixing a drum of blue Acrytech acrylic coating during production
Published chemistry and VOC values are backed by AT Sports lab verification and technical data sheets.
AT Sports
Aerial view of Stanford's Arrillaga Tennis Center showing 12 championship outdoor courts
Case Studies

Stanford University

Arrillaga Tennis CenterPalo Alto, California
12
Championship
Outdoor Courts
~1,000
Spectator
Seating
2026
Opened
April

Opened in April 2026, Stanford's new Arrillaga Tennis Center was developed to support championship competition, daily athlete development and major collegiate events. The complex includes 12 championship outdoor courts, athlete-support facilities, spectator accommodations and covered practice courts, featuring AT Sports Acrytech Coatings surfacing system.

COMPARABLE PROJECT CHARACTERISTICS
• Championship competition• Elite athlete development• Major collegiate environment• High-profile institutional facility• Acrytech surface system
Arrillaga Tennis Center — Taube Pavilion covered courts
Arrillaga Tennis Center — Taube Pavilion covered courts
Championship outdoor courts and spectator seating
Championship outdoor courts and spectator seating
AT Sports
Pickleball

Built for pickleball.

Purple and gray indoor pickleball courts at Let's Go Pickleball & Padel
Let's Go Pickleball & Padel logo
CushionX + Acrytech

Let's Go Pickleball & Padel

21 indoor courts2 padel courtsPeachtree City, GA

A year-round, temperature-controlled indoor club for open play, leagues, tournaments, clinics and events. Courts are surfaced with a CushionX cushion system finished with Acrytech color coatings for comfort underfoot and a consistent playing surface.

Red and gray indoor pickleball courts at Match Point Pickleball Club
Match Point Pickleball Club logo
CushionX + Acrytech

Match Point Pickleball Club

38 indoor courtsColumbus, OH

An indoor club supporting memberships, leagues, lessons and open play, with courts built on a CushionX cushion system and finished with Acrytech color coatings.

AT Sports
References · Facilities

Trusted by collegiate and club programs.

Collegiate competition centers and private racquet clubs that rely on AT Sports surfaces for daily training and match play.

Collegiate & Club Tennis
Virginia Tech logo
Virginia Tech
Burrows-Burleson Tennis Center · Blacksburg, VA
Vanderbilt University logo
Vanderbilt University
Lummis Family Tennis Center · Nashville, TN
Belmont University logo
Belmont University
Beaman Family Tennis Complex · Nashville, TN
Farm & Forge logo
Farm & Forge
Private racquet campus · College Grove, TN
Texas Tech University logo
Texas Tech University
McLeod Tennis Center · Lubbock, TX
Georgia Tech logo
Georgia Tech
Ken Byers Tennis Complex · Atlanta, GA
Baylor University logo
Baylor University
Hurd Tennis Center · Waco, TX
University of Oklahoma logo
University of Oklahoma
Headington Family Tennis Center · Norman, OK
Pickleball & Racquet Clubs
The Picklr logo
Multiple locations
Dill Dinkers logo
Multiple locations
Pickle Rage logo
Multiple locations
The Pickle Pad logo
Multiple locations
Chicken N Pickle logo
Multiple locations
PACE Pickleball Club logo
Multiple locations
The Hub Pickleball logo
Multiple locations
The Pickle Club logo
First CushionX facility in Australia
Club Volo logo
Multiple locations
Invited logo
Private country & city clubs

The brands shown represent only a portion of the organizations that choose AT Sports. Our surfacing systems are trusted at hundreds of additional facilities across North America and internationally.

AT Sports
Technical Support
Technical Resources

Professional engineering
& technical support.

AT Sports combines in-house product development and chemistry expertise with specialized asphalt and concrete resources to address technical requirements across the complete sports surface system, from substrate conditions through finished surface performance.

01In-House Product Engineering
In-House

Caldwell Robinson

AT Sports

With an engineering background, Caldwell is the product developer behind AT Sports' surfacing systems, providing direct guidance on system design, material selection, application requirements, compatibility and surface performance.

02Coatings & Material Science
In-House

AT Sports Chemistry Team

AT Sports

Supports formulation, testing, quality control, troubleshooting and continued product development, providing direct access to the team behind AT Sports' manufactured surfacing materials.

03Asphalt
External Resource

Tim Murphy

Murphy Pavement Technology

Specialized expertise in pavement design, materials, construction practices, troubleshooting and evaluation of existing asphalt conditions.

murphypavetech.com
04Concrete
External Resource

Fred Kauffman

Kauffman Precast

Specialized expertise in concrete construction, substrate conditions, preparation and other concrete-specific considerations.

kauffmanprecastllcs.com
AT Sports
Warranty

Documented
product warranty.

CushionX warranty terms, coverage period and conditions are provided in the published CushionX Limited Warranty included in the Technical Appendices.

CushionX warranty summary to confirm

Coverage for the Acrytech finish coatings applied as part of the CushionX system is described in the published warranty documentation.

TermLimited Product Warranty
Full terms and conditions are provided in the CushionX Limited Warranty included in the Technical Appendices.
AT Sports certified crew applying an Acrytech surface system on a tennis court

Warranty coverage applies when CushionX products are installed by AT Sports-certified crews to published guidelines.

AT Sports
Aerial view of a PPA Tour stadium pickleball court finished with Acrytech
AT Sports
Next Steps

Built with
purpose.

Questions about this submittal, product samples, color drawdowns or project-specific documentation can be directed to AT Sports.

Contact
AT Sports, Inc. · 770-734-3000 · sales@atsports.com
Sales and technical support
AT Sports
Surfaces. Systems. Solutions.
189 Etowah Industrial Court, Canton, GA 30114
atsports.com
AT Sports quality control lab
AppendicesCushionX Product Submittal
Technical Appendices

Technical Appendices

Technical data sheets, safety data sheets, specifications, test reports and warranty documentation for the CushionX Cushion Surface System. Attached documents follow this section in the order listed.

AT Sports
Appendix Index

Technical documentation index.

The following documents are attached to this submittal. Current versions are maintained by AT Sports and are available from AT Sports.

A
CushionX System SpecificationTo Confirm
3-part guide specification
B
CushionX Rubber Roll Technical Data SheetTo Confirm
C
Adhesive / Fill Coat Technical DataTo Confirm
D
Acrytech Resurfacer Technical Data Sheet
E
Acrytech Color Technical Data Sheet
F
Line Paint / Line Primer Technical Data
G
Safety Data Sheets
All products listed above
H
Acrytech Color Chart
I
Shock Absorption / Force Reduction TestingTo Confirm
J
ITF Court Pace Classification Certificates
Acrytech finish
K
CushionX Installation GuidelinesTo Confirm
L
New Surface Maintenance Guide
M
CushionX Limited WarrantyTo Confirm
Available on Request

Physical color samples and drawdowns · certificates of insurance · project references · LEED / VOC compliance letters · project-specific product substitution documentation.

AT Sports