AT Sports
Acrytech Product Submittal — Generic Package
Ready to send — no project details
Acrytech color coating poured onto a finished court surface
AT Sports
Edition 2026
Product Submittal Package · Acrytech

Acrylic Sports
Surface System

Acrytech
Product Submittal Package

Product submittal information.

Product / systemAcrytech Coatings System
ManufacturerAT Sports, Inc. · 189 Etowah Industrial Court, Canton, GA 30114
Phone770-734-3000
Websiteatsports.com
Specification sectionAthletic Surfacing — for use under the project’s athletic surfacing section
Contents
Introduction03
Manufacturer Qualifications04
Specification Compliance05
Part 2 — Products
System Overview06
Product Line — Color Coatings07
Product Line — Primers & Resurfacers08
Product Line — Lines & Additives09
Product Line — Acrytech Colors10
Court Pace & ITF Classification11
Performance Testing12
Product Chemistry & VOC13
Part 3 — Execution
Concrete — Design & Construction14
Concrete — Primers & Field Notes15
Installation — Surface Preparation16
Installation — Application & Finishing17
Coverage & Mixing18
New Surface Maintenance19
Warranty & References
Warranty20
Official Surface Partnerships21
Case Studies — Tennis & Pickleball22
Collegiate & Club Facilities23
Contact24
Technical Appendices25

Technical data sheets, safety data sheets, warranty and supporting documents are listed in the Technical Appendices and attached to this submittal.

Acrytech drums and silica sand staged in the AT Sports warehouse, Canton, Georgia
Acrytech products staged for shipment at the AT Sports facility in Canton, Georgia.
AT Sports
Introduction

Submitted for
specification review.

AT Sports submits the Acrytech Coatings System for review under the athletic surfacing section. Acrytech is a colored and textured 100% acrylic surfacing system for asphalt, concrete and existing tennis, pickleball and multi-sport courts.

This package contains the product data, guide specification, test data, installation requirements and warranty documentation needed to evaluate Acrytech against a project specification. Technical and safety data sheets are attached in the Technical Appendices.

AT Sports formulates, manufactures and supports Acrytech in Canton, Georgia, so questions on product data, substrate conditions or substitutions go directly to the manufacturer.

Signature of Brad Carroll
Brad Carroll
President, AT Sports
Requested Action

List Acrytech by AT Sports, Inc. as an approved manufacturer, or accept it as an approved equal to the basis-of-design product.

Red and blue pickleball court finished in the AT Sports warehouse, with stacked Acrytech drums behind it
Acrytech-coated court in the AT Sports warehouse, Canton, Georgia.
AT Sports
About AT Sports

Manufacturer qualifications.

AT Sports, Inc. has formulated and manufactured sports surfacing systems in Canton, Georgia since 1995. One company is responsible for the Acrytech system from raw material to finished court.

1995
Founded
30+ years
Manufacturing experience
Canton, GA
Manufactured in the USA
ASBA
Member since 2015
Member, American Sports Builders Association
Single-source responsibility

All system components are formulated, manufactured and quality-controlled by AT Sports.

Batch traceability

Every batch is tied to a documented production run and color-matched to a reference standard before release.

Published documentation

Three-part guide specification, TDS, SDS, application instructions, maintenance guide and limited warranty.

Technical support

System specification, application guidance, field troubleshooting and post-installation assistance from the manufacturer.

Batch-numbered production sample jars
Batch-numbered production samples
Color matching board compared against reference standards
Color matching against reference standards
AT Sports
Specification Compliance

Acrytech at a glance.

A summary of how the Acrytech Coatings System meets typical acrylic sports-surfacing requirements, with the document in the Technical Appendices that supports each item.

RequirementAcrytechSupporting document
System typeColored, textured 100% acrylic latex surfacing system, self-crosslinking, for asphalt, concrete and existing sports surfacesSystem Specification 1.1 · TDS
Industry standardAll work conforms to American Sports Builders Association (ASBA) guidelinesSystem Specification 1.2
Court paceITF classified: Category 3 (Medium) and Category 4 (Medium-Fast)ITF Classification Certificates
Accelerated weathering5,555 hours, ASTM G154 Cycle 1, with no cracking, chalking, checking, peeling or flaking observedH.B. Fuller test report
Scrub resistanceASTM D2486: 536 cycles to failure vs. 266 in the reported comparison (≈2×)H.B. Fuller test report
Finished-surface testingSurface friction (dry and wet), ball rebound and trajectory, force reduction, vertical deformation, energy restitutionFirefly Sports testing
VOCAcrytech Color 42 g/L · Acrytech Resurfacer 43 g/LColor and Resurfacer TDS
Restricted substancesAcrytech Color contains no asbestos, lead, mercury, heavy metals, PCB or formaldehydeColor TDS
Warranty2-year limited product warranty (specification minimum: one year)Acrytech Limited Warranty
InstallerAT Sports-certified installer, applying to published installation guidelinesAcrytech Limited Warranty
TraceabilityBatch number of each product recorded on site and kept for the warranty periodSystem Specification 1.2
For Specifiers · Suggested Specification Language

Copy into Section 2.1 of the project specification to list Acrytech as an acceptable manufacturer.

2.1 MANUFACTURERS
A. Acceptable manufacturer: AT Sports, Inc., 189 Etowah Industrial Court, Canton, GA 30114.
   770-734-3000 · atsports.com
   1. Product: Acrytech Coatings System (Acrytech Resurfacer, Acrytech Color, Acrytech Line Paint).

The full three-part Acrytech System Specification is included as Appendix A and may be used as a basis of design.

AT Sports
Products · System Overview

System overview.

Components and quality requirements from the Acrytech System Specification for colored and textured acrylic surfacing over asphalt, concrete and existing sports surfaces (Appendix A).

Materials
Section 2.2
ComponentSolids by wt.Weight
Faultline Sport PatchAcrylic latex emulsion mixed with Portland cement and sand. Semi-flexible latex concrete for depressions over 1/4" (6.4 mm) and cracks over 3/8" (9.5 mm).≈47%8.8 lb/gal (1.05 kg/L)
Latex-Based Primer & SealerEngineered styrene-butadiene latex for painted and unpainted asphalt and concrete. Seals, waterproofs and prevents efflorescence and asphalt impurities bleeding into following coats.See TDSSee TDS
Acrytech ResurfacerAcrylic latex concentrate mixed with water and silica sand on site to hide patchwork, smooth and prepare for color. One to two coats.≈45%*9.5 lb/gal (1.14 kg/L)
Acrytech ColorAcrylic latex concentrate mixed with water and silica sand (texture) on site, used as the secondary and final coatings.≈47%*9.8 lb/gal (1.17 kg/L)
Acrytech Textured ColorColor factory-mixed with silica sand at the ITF Medium court pace classification rate.≈65%12.5 lb/gal (1.5 kg/L)
Acrytech Line PrimerOptional clear-drying primer that prevents line bleed for the most precise lines. Recommended for professional courts.≈29%*10 lb/gal (1.2 kg/L)
Acrytech White Line PaintTextured bright white acrylic line paint. 20–25% may be added to Color to make the lighter colors used for QuickStart lines.≈71%*12.4 lb/gal (1.49 kg/L)

*Solids and pigments by weight. Values are approximate; see each product’s TDS.

Submittal Requirements Met
Sections 1.2 – 1.3
  • Technical Data Sheets for all system componentsAppendices B–E
  • Color chartAppendix G
  • Safety Data Sheets for all system componentsAppendix F
  • Manufacturer’s warranty, 2-year (spec minimum: 1 year)Appendix N

Material volume estimates for each product are available on request (AT Sports Paint Estimator).

AT Sports
Products · Color Coatings · 1 of 4

Color coatings.

Every Acrytech color coat is a 100% acrylic latex, self-crosslinking formulation. The line is engineered so each product can be matched to the substrate, the level of use and the sport.

Color & Finish Coats
Gal / SY / coat
ProductCoverageAppl. tempDryCurePackaging
ColorThe standard Acrytech color and finish coat. 100% acrylic latex with self-crosslinking technology and high-quality pigments.Conc. .04–.05
Tex. .06–.07
34���130°F1–3 hr24 hrConc. 55 / 30 / 5 galTex. 55* / 30 gal
ColorFlexFlexible color coat for cushioned systems and overlays, substantial substrate movement and fabric crack repair systems.Conc. .045–.06
Tex. .06–.07
34–130°F1–3 hr24 hrConc. 55 / 30 / 5 galTex. 55* / 30 gal
Urethane ColorPolyurethane-modified acrylic color for courts with heavy traffic and usage.Conc. .04–.05
Tex. .06–.07
34–130°F1–3 hr24 hrConc. 55 / 30 galTex. 55* / 30 gal
Color UV+Color system with additional UV resistance and microorganism protection.Conc. .04–.05
Tex. .06–.07
36–130°F1–3 hr24 hrConc. 55 / 30 galTex. 55* / 30 gal
Quick-DryVOC-free coating formulated to dry and cure faster than standard color. Available in ColorFlex coatings only..04–.0534–130°F1–3 hr24 hr55 / 30 / 5 gal
CoolGuardTextured, flexible acrylic surface technology that reduces surface temperatures by up to 30%..075–.0936–130°F1–3 hr24 hr55 / 30 gal
Specialty Sport Coatings
Gal / SY / coat
ProductCoverageAppl. tempDryCurePackaging
Roller SportsFiber-reinforced, highly abrasion-resistant surface for roller sports. Player’s Choice colors only..04–.04536–130°F1–3 hr72 hr55 / 30 gal
ShuffleboardFormulated with select slip agents for an ideal puck slide. Player’s Choice colors only..06–.0750–130°F1–3 hr48 hr55 / 30 gal

All products carry a 2-year limited warranty. *55-gal drums of textured product contain 39 gal. Source: AT Sports Product Catalog 2026. Full values are given in each product’s Technical Data Sheet (Technical Appendices).

AT Sports
Products · Primers & Resurfacers · 2 of 4

Primers, sealers & resurfacers.

Preparation products are selected for the substrate: primers and sealers bond to and protect asphalt and concrete, and resurfacers fill, level and build the base the color coats are applied to.

Primers, Sealers & Clear Coats
Gal / SY / coat unless noted
ProductCoverageAppl. tempDryCurePackaging
Latex-Based Primer & SealerSBR latex that waterproofs the substrate and blocks efflorescence and asphalt impurities. Can go on green concrete 3–7 days after the pour..05–.0734–130°F3 hr—55 / 30 / 5 gal
Solvent Primer & SealerPenetrating acrylic primer for concrete with fly ash or high limestone, and clean concrete without etching, grinding or blasting.1st coat 28–39 SY/gal
2nd coat 39–50 SY/gal
50–100°F1–4 hr24 hr55 / 5 gal
Slurry CoatSelf-leveling acrylic cement admix for smoothing, control joints, depressions and cracks up to 1/4", and over existing coatings..05–.0740–120°F—48 hr55 / 30 / 5 gal
Urethane PrimerAbrasion-resistant, flexible, non-tacky aliphatic water-based polyurethane primer. Dries clear.17–22 SY/gal—30 min–1 hr4 hr55 / 30 / 5 gal
Urethane Clear CoatHard, non-tacky polyurethane clear coat that seals and extends the life of all Acrytech coatings.22–33 SY/gal—30 min–1 hr4 hr55 / 30 / 5 gal
Resurfacers & Patch
Gal / SY / coat
ProductCoverageAppl. tempDryCurePackaging
ResurfacerFilling and repair layer that hides patchwork, smooths the surface and prepares it for color.Conc. .04–.07
Tex. .065–.075
34–130°F1–3 hr24 hrConc. 55 / 30 / 5 galTex. 55* / 30 gal
Resurfacer FlexFor new and existing membrane overlays, asphalt and concrete substrates.Conc. .045–.06
Tex. .065–.075
36–130°F1–3 hr24 hrConc. 55 / 30 / 5 galTex. 55* / 30 gal
Resurfacer PlusFor use over court overlays, crack bridging and filling, and heavy resurfacing..07–.1040–90°F1–3 hr24 hr55 / 30 gal
Urethane ResurfacerPolyurethane-modified resurfacer for crack bridging and filling and heavy resurfacing..04–.0534–130°F1–3 hr24 hr55 / 30 gal
Faultline Sport PatchLatex binder mixed with Portland cement and sand for depressions over 1/4" and cracks wider than 3/8".Varies by repair50–130°F1–3 hr24 hr55 / 30 / 5 gal

2-year limited warranty on all products except Faultline Sport Patch (see TDS). *55-gal textured drums contain 39 gal. Urethane Primer and Clear Coat coverage is as printed in the catalog (“Gal per sq yd”).

AT Sports
Products · Lines & Additives · 3 of 4

Lines & additives.

Line products finish the court layout, and additives let the installer tune texture and drying on site.

Line Marking
ProductCoverageAppl. tempDryCurePackaging
Line PrimerClear-drying primer applied before White Line Paint to prevent bleed and create precise line edges.480 lin. ft at 2" / gal36–130°F1–3 hr48 hr1 gal
Line PaintTextured acrylic line paint, highly resistant to UV degradation. Tennis and Pickleball (higher sand volume) formulas.480 lin. ft36–130°F2–4 hr24 hrWhite 5 / 1 gal
Black Light Line SealerClear sealer applied over court lines that illuminates under black light.480 lin. ft at 2"34–120°F1–4 hr24 hr5 / 1 gal
Sand & Additives
Gal / SY
ProductCoverageAppl. tempDryCurePackaging
Liquid SandDense, 80-mesh sand-filled neutral carrier that replaces dry bagged sand when mixed with Color concentrate and water. 14–15 lb/gal, ≥74% solids, ≤63% sand by weight..034–.05———30 gal
Silica SandPremium silica for consistent texture, traction and ball response. F-55 mesh (fine) and 44 mesh (coarse).Per mix design———50 lb bags
Drying Accelerant99% isopropyl alcohol. Replace up to half of the mixing water to speed drying as needed.N/A———55 gal
White line paint rolled between taped edges on a blue Acrytech court
AT Sports
Products · Acrytech Colors · 4 of 4

Acrytech colors.

Every Acrytech color coat is available in 32 standard colors, with custom colors made to order.

Player’s Choice Colors

  • Performance Green
  • Competition Green
  • Forest Green
  • Field Green
  • Frost Blue
  • Light Blue
  • Competition Blue
  • Standard Blue
  • Terracotta
  • Standard Orange
  • Classic Red
  • Slate
  • Sandstone
  • Gray
  • Beige
  • Black

Specialty Colors

Priced by pigment
  • Nautical Navy
  • Sky Blue
  • Caribbean Blue
  • Irish Green
  • Sea Green
  • Kiwi
  • Lime
  • Crimson
  • Bright Red
  • Coral
  • Passion Pink
  • Bright Orange
  • Bright Yellow
  • Pro Purple
  • Ultra Violet
  • Viva Violet

Custom colors are available. Screens alter how colors appear, so request a drawdown from your installer or AT Sports account manager for true color. Samples are free; only shipping applies.

AT Sports
Products · Court Pace

Two profiles.
Matched to the court.

35–39CPR
ITF Classified Court Pace badge — Category 3, Medium
Level 3Medium
ITF Category 3 classification range
Typical Applications
Recreational and club tennis · pickleball · multi-sport courts
40–44CPR
ITF Classified Court Pace badge — Category 4, Medium-Fast
Level 4Medium-Fast
ITF Category 4 classification range
Typical Applications
Competition, collegiate, player-development and indoor tennis

Acrytech Color is configured to the Medium or Medium-Fast profile through controlled aggregate selection and loading during batching.

Independently Tested
ITF Recognized
Acrytech Color Coatings · Category 3 & Category 4

Acrytech color coatings are officially recognized by the International Tennis Federation (ITF) under both Category 3 and Category 4.

This recognition confirms our coatings meet ITF performance standards for pace, bounce and playing characteristics.

Published Acrytech Color Profiles · Aggregate + Loading
Level 3 / MediumAFS-55· 200 lbs
Level 4 / Medium-FastAFS-60· 150 lbs

The court-pace profile for each project is set in the system specification. Where a project calls for a specific CPR target, AT Sports confirms the aggregate profile and application before production. Additional published profiles are available.

AT Sports
Products · Performance Testing

From material behavior
to finished-surface response.

Acrytech performance is evaluated through third-party material testing and finished-surface testing focused on the characteristics that influence court performance.

01Third-Party Material Testing
H.B. Fuller testing
5,555hrs

Accelerated Weathering

ASTM G154 Cycle 1
H.B. Fuller North America

No Film
Failure Observed

Cracking · Chalking · Checking · Peeling · Flaking

No coating-film failure of these types was observed in the reported accelerated-weathering program.

2×266 → 536

Scrub Resistance

ASTM D2486 cycles to failure — approximately 2× scrub resistance in the reported comparison.

02Finished-Surface Performance
firefly sports testing

Performance
evaluated
beyond court pace.

Acrytech surface-development testing evaluates multiple characteristics of the finished playing surface, providing additional performance data beyond court-pace classification.

01Surface FrictionDry + wet surface testing
02Ball ResponseVertical rebound + trajectory
03Surface MechanicsForce reduction + vertical deformation
04Energy ResponseEnergy restitution

Material behavior and finished-surface response, independently tested.

Detailed testing data and available supporting documentation are included in the technical appendices of this submittal.

AT Sports
Products · Product Responsibility

Documented
product chemistry.

Acrytech Color
100% acrylic latex
Self-crosslinking technology
42 g/L
Published VOC
Acrytech Resurfacer
100% acrylic latex
Self-crosslinking technology
43 g/L
Published VOC
Acrytech Color — Contains No
—Asbestos
—Lead
—Mercury
—Heavy metals
—PCB
—Formaldehyde

Product information from the published Acrytech Color Technical Data Sheet.

AT Sports technician mixing a drum of blue Acrytech acrylic coating during production
Published chemistry and VOC values are backed by AT Sports lab verification and technical data sheets.
AT Sports
Execution · Concrete Design & Construction

Designed for coatings from the pour.

Why it matters

Concrete holds salts and moisture that migrate to the surface. Slabs not designed for coatings can bubble, blister and delaminate.

Design & Construction
01
Vapor barrier
Plastic vapor barrier before the pour: two perpendicular layers, taped joints.
02
No fly ash
Densifies concrete, causes excessive efflorescence (dusting) and can leave an oily residue.
03
Specify OPC
Ordinary Portland Cement (Type I/IA). Avoid Portland Limestone Cement; above 10% it can hinder adhesion.
04
Control joints
Minimize or omit. If required, place them outside the playing area.
05
Finish
Light to medium broom finish for a mechanical bond.
06
Cure
Moisture cure 28 days minimum. Curing agents not recommended; some drying retarders are incompatible. Contact AT Sports.
07
Prepare
Acid-etch (diluted muriatic or phosphoric) and rinse, or grind or shot-blast, then pressure wash.
08
Prime
Latex-compatible specialty primer on bare concrete. ACRY-Lock primes and adds a top-side moisture barrier.

In addition to ASBA guidelines for grade and mix design.

AT Sports
Execution · Concrete Primers & Field Notes

Primer selection & field checks.

Primer Selection
Latex-Based Primer & SealerSolvent Primer & Sealer
When to applyGreen concrete 3–7 days after the pour, or after the 28-day cure.After cure.
Surface prepAfter 28-day cure: acid-etch, grind or shot-blast, then clean.Pressure washing, without etching, grinding or blasting.
Best suited toGreen concrete (uniquely applied before full cure).Mixes with fly ash or added limestone (Type IL).
Timing28+ day concrete · within moisture & RH limits · limits outgassing
Prime while the slab is cooling

Late afternoon, early evening, or morning once dew has evaporated, never as it heats up. A hot slab may be misted, not soaked.

Field Notes
Acid testNo bubbling means no etching: the slab may be pre-etched or have a curing agent.
Tape testIf primer lifts with masking tape, more preparation is needed.
MoistureCheck per primer guidelines, typically ASTM F1869 and/or ASTM F2170.
Slick finishMachine-finished concrete may need shot-blasting, scarifying or extreme etching.
Fewer coatsMore acrylic coats seal off vapor transmission and promote blistering.
Peeling paintRemove existing paint that is delaminating or peeling.
Installer performing a masking-tape adhesion test on freshly primed concrete
AT Sports
Execution · Surface Preparation

Surface preparation.

Execution requirements from Part 3 of the Acrytech System Specification. See each product’s TDS for application limits.

Surface Preparation
Sections 3.2 – 3.4
New Asphalt
14 days
Minimum cure
  1. 01Inspect for contamination and unevenness; report to the general contractor.
  2. 02Remove mold, mildew, algae, dirt, grease, oil and debris with issue-specific cleaners.
  3. 03Flood test; fill depressions of 1/16" (1.6 mm) or more with Faultline Sport Patch and let cure.
New Concrete
28 days
Minimum cure
  1. 01Broom finish, with vapor barrier installed, for proper bonding.
  2. 02Acid-etch, grind or shot-blast.
  3. 03Pressure wash and rinse.
  4. 04Flood test; patch depressions of 1/16" or more.
  5. 05Prime with Acrytech Latex-Based Primer & Sealer.

Exception: Latex-Based Primer & Sealer may go on green concrete 3–7 days after the pour (see Concrete pages).

Existing Surfaces
Clean & repair
Before any coating
  1. 01Pressure wash to remove mold, mildew, algae, dirt, grease, oil and debris.
  2. 02Inspect for contamination and unevenness; report findings.
  3. 03Fill cracks with Faultline Sport Patch, or the specified crack repair method.
Inspector evaluating a court substrate before coating
Surface inspection before coating.
AT Sports
Execution · Application & Finishing

Application & finishing.

Application
Section 3.5
Inspector approves the surface before any coating.
Apply every coat with a soft rubber squeegee.
Let each coat dry completely, usually 1–3 hours.
1–2
Resurfacer coats
New or rough surfaces require two coats.
2
Color coats
Standard durability, suitable for most courts.
3
Color coats
Increased durability for high-use courts.

Resurfacer and Color are mixed according to each product’s TDS.

Line Markings
Section 3.6
  1. 1Wait

    Color fully dry, up to 24 hr after the final coat.

  2. 2Tape & lay out

    USTA / USA Pickleball guidelines, machine-laid tape.

  3. 3Prime

    One coat of Line Primer for precise edges.

  4. 4Paint

    Textured White Line Paint, soft-bristle brush or quality roller; a second coat may be needed.

Work length · Above 86°F (30°C) work 20 ft at a time; below, up to 40 ft.

Completion
Section 3.7
Clear the site

Remove all equipment, leftover materials and waste.

No traffic for 24 hours

No traffic of any kind, then confirm the surface has dried.

Drying can run longer

Lack of sun, high humidity, cool substrates or below 70°F (21°C).

Installer rolling a white court line between masking tape
AT Sports
Execution · Coverage & Mixing

Material quantities,
estimated by the court.

Estimated Material Quantities
Gallons
ProductCoatsGal / SY / coatTennis court
60 × 120 ft · 7,200 SF
Pickleball court
30 × 60 ft · 1,800 SF
Per 1,000 SF
111.1 SY
Acrytech ResurfacerTextured resurfacer10.07056.014.07.8
Acrytech ColorTextured color20.0675108.027.015.0
Acrytech ColorConcentrate finish coat10.04536.09.05.0
Total system200.050.027.8

Estimates based on published Acrytech coverage rates for a typical build of one resurfacer coat, two textured color coats and one concentrate finish coat. Areas shown are playing area plus standard run-out. Final quantities depend on substrate texture, porosity, application method and the number of coats specified. Line paint, primer, sealer and crack-repair materials are estimated separately.

Mixing Chart
Concentrate + sand + water
Pure (concentrate)SandWaterYieldCoverage
1 gal7.27 lb0.58 gal2 gal20 SY
5 gal36.36 lb2.91 gal10 gal100 SY
15 gal109.09 lb8.73 gal30 gal300 SY
30 (27.5) gal200 lb16 gal55 gal550 SY

Mixing, dilution, application temperatures and cure time between coats are defined in each product’s Technical Data Sheet.

AT Sports
Execution · New Surface Maintenance

Years of play, with simple care.

With proper maintenance, Acrytech surfaces provide many years of service. The full New Court Surface Maintenance guide is included in the Technical Appendices for the owner.

01First 24 hours

Keep the court closed for at least 24 hours after the final coat so coatings can cure. For two weeks after, do not play when the court is wet.

02Clean monthly

Watch shaded areas and corners for mold or mildew. Indoor courts need frequent vacuuming and at least one wet cleaning a year with mild detergent and soft bristles.

03Gentle cleaners

Use mild dish soap or a neutral-pH cleaner such as Simple Green with a soft brush. Never use abrasive cleaners. A water rinse is usually enough.

04Limit pressure

High pressure can damage coatings. Keep the tip away from the surface; surface cleaners avoid the striping left by hand wands.

05Standing water

Remove standing water often. Dirt settles in puddles and stains. Do not let irrigation spray onto the court.

06Debris

Clear leaves and pine needles promptly. Debris stains and feeds mold and mildew; acrylic itself does not support growth.

Damage Prevention
Non-marking court shoes only
No bikes, roller blades or skateboards
No gum, food or drinks other than water
Do not drag chairs, benches or equipment
Pad chair and equipment legs; anchor benches and fixtures
Protect the surface before driving maintenance vehicles on it
Finished Acrytech textured surface and white line at sunset
AT Sports
References · Warranty

Documented
product warranty.

AT Sports warrants that Acrytech products conform to product specifications and are free from defects in material and workmanship for two years, subject to the terms and conditions of the published warranty.

Coverage is valid when Acrytech products are properly applied by AT Sports-certified installers according to installation guidelines and standard industry practices.

The warranty is limited to replacement value of affected product and excludes labor, removal / application costs, shipping and incidental or consequential damages.

2-YearLimited Product Warranty
Full terms and conditions are provided in the Acrytech Limited Warranty included in the Technical Appendices.
Registration

Valid when the installer completes the Acrytech Warranty Record Form, or the application date can be verified by the installer. The form may be emailed to warranty@atsports.com within 90 days of completion for record keeping.

Voided if

Acrytech products are covered with, or installed with, non-Acrytech products without prior written approval from AT Sports.

Not covered

Improper preparation or application, structural (substrate) changes or defects, previously applied products, weather conditions, or failure to follow installation instructions and industry practice.

Excluded abuse

Non-pedestrian traffic, burns, corrosive chemicals, sharp or abrasive objects, excessive weights, roots and planters left on the surface, constant submersion, or long-standing dirt and debris.

Summary only. The Acrytech Limited Warranty (effective on purchases on or after November 1, 2024) governs and is included in the Technical Appendices.

AT Sports
References · National Racquet Partnerships

Official Surface
Partnerships

Aerial view of a PPA Tour tournament complex with Acrytech competition courts
Official SurfacePPA Tour

Acrytech serves as the official surface of the PPA Tour, supporting a national competition environment where surface consistency, event scheduling and presentation are highly visible.

“AT Sports is an integral partner of the PPA Tour.”

PPA Tour partnership letter

Major League Pickleball arena match played on an Acrytech court
Official SurfaceMajor League Pickleball

Acrytech & RollX also serve as the official surface of Major League Pickleball, extending AT Sports’ experience across another nationally visible professional racquet-sport platform.

Why It Matters

Proven under concentrated play.

As the #1 court surface in professional pickleball and Official Surface of the PPA Tour and Major League Pickleball, Acrytech performs in an environment characterized by frequent starts, stops, lateral movement and concentrated player traffic. That high-use track record provides relevant evidence of coating durability for tennis facilities, where play is distributed across a significantly larger court footprint.

National competitionSurface performance across recurring professional events.
Concentrated playRepeated player movement within compact, high-use court areas.
Manufacturer supportDirect product, event and technical support from AT Sports.
AT Sports
References · Case Studies

Proven where it's played.

Kingston Open ATP Challenger match court surfaced with Acrytech
Kingston Open logo
Official Surface ATP Challenger 75

Kingston Open

6 professional courts2 venues

AT Sports was the Official Surface of the Kingston Open, preparing and resurfacing six courts across the Liguanea Club and Pegasus Hotel. AT Sports crack-repair materials addressed existing surface conditions, and Acrytech coatings created the finished hard-court playing surface for back-to-back ATP Challenger 75 competition.

Cardinal and gray championship courts at Stanford's Arrillaga Tennis Center
Stanford University logo
Acrytech Coatings

Stanford University

12 championship courtsPalo Alto, CA

Opened in April 2026, Stanford's Arrillaga Tennis Center supports championship competition, daily athlete development and major collegiate events. Its 12 championship outdoor courts and covered practice courts are surfaced with the AT Sports Acrytech Coatings system.

Purple and gray indoor pickleball courts at Let's Go Pickleball & Padel
Let's Go Pickleball & Padel logo
CushionX + Acrytech

Let's Go Pickleball & Padel

21 indoor courts2 padel courtsPeachtree City, GA

A year-round, temperature-controlled indoor club for open play, leagues, tournaments, clinics and events. Courts are surfaced with a CushionX cushion system finished with Acrytech color coatings for comfort underfoot and a consistent playing surface.

Red and gray indoor pickleball courts at Match Point Pickleball Club
Match Point Pickleball Club logo
CushionX + Acrytech

Match Point Pickleball Club

38 indoor courtsColumbus, OH

An indoor club supporting memberships, leagues, lessons and open play, with courts built on a CushionX cushion system and finished with Acrytech color coatings.

AT Sports
References · Facilities

Trusted by collegiate and club programs.

Collegiate competition centers and private racquet clubs that rely on AT Sports surfaces for daily training and match play.

Collegiate & Club Tennis
Virginia Tech logo
Virginia Tech
Burrows-Burleson Tennis Center · Blacksburg, VA
Vanderbilt University logo
Vanderbilt University
Lummis Family Tennis Center · Nashville, TN
Belmont University logo
Belmont University
Beaman Family Tennis Complex · Nashville, TN
Farm & Forge logo
Farm & Forge
Private racquet campus · College Grove, TN
Texas Tech University logo
Texas Tech University
McLeod Tennis Center · Lubbock, TX
Georgia Tech logo
Georgia Tech
Ken Byers Tennis Complex · Atlanta, GA
Baylor University logo
Baylor University
Hurd Tennis Center · Waco, TX
University of Oklahoma logo
University of Oklahoma
Headington Family Tennis Center · Norman, OK
Pickleball & Racquet Clubs
The Picklr logo
Multiple locations
Dill Dinkers logo
Multiple locations
Pickle Rage logo
Multiple locations
The Pickle Pad logo
Multiple locations
Chicken N Pickle logo
Multiple locations
PACE Pickleball Club logo
Multiple locations
The Hub Pickleball logo
Multiple locations
The Pickle Club logo
First CushionX facility in Australia
Club Volo logo
Multiple locations
Invited logo
Private country & city clubs

The brands shown represent only a portion of the organizations that choose AT Sports. Our surfacing systems are trusted at hundreds of additional facilities across North America and internationally.

AT Sports
Aerial view of a PPA Tour stadium pickleball court finished with Acrytech
AT Sports
Next Steps

Built with
purpose.

Questions about this submittal, product samples, color drawdowns or project-specific documentation can be directed to AT Sports.

Contact
AT Sports, Inc. · 770-734-3000 · sales@atsports.com
Sales and technical support
AT Sports
Surfaces. Systems. Solutions.
189 Etowah Industrial Court, Canton, GA 30114
atsports.com
AT Sports quality control lab
AppendicesAcrytech Product Submittal
Technical Appendices

Technical Appendices

Technical data sheets, safety data sheets, specifications, test reports and warranty documentation for the Acrytech Coatings System. Attached documents follow this section in the order listed.

AT Sports
Appendix Index

Technical documentation index.

The following documents are attached to this submittal. Current versions are maintained by AT Sports and are available from AT Sports.

A
Acrytech System Specification
3-part guide specification
B
Technical Data Sheets
Acrytech Color & ColorFlex
C
Technical Data Sheets
Acrytech Resurfacer & Resurfacer Flex
D
Technical Data Sheets
Latex-Based Primer & Sealer, Solvent Primer
E
Technical Data Sheets
Line Primer & Line Paint
F
Safety Data Sheets
All products listed above
G
Acrytech Color Chart
H
Acrytech Mixing Chart
I
ITF Court Pace Classification Certificate
J
Firefly Sports Surface Performance Testing
K
Third-Party Laboratory Testing
H.B. Fuller weathering & scrub, VOC (EPA Method 24), solar reflectance
L
Concrete Design & Preparation
M
New Court Surface Maintenance
N
Acrytech Limited Warranty
Available on Request

Physical color samples and drawdowns · certificates of insurance · project references · LEED / VOC compliance letters · project-specific product substitution documentation.

Complete Acrytech Technical Data Sheet library

A full list of Technical Data Sheets for the Acrytech product line.

View All TDS
AT Sports Product Catalog

A full list of AT Sports Products.

View Catalog
AT Sports
Appendix A: Acrytech System Specification, page 1 of 3
Appendix A: Acrytech System Specification, page 2 of 3
Appendix A: Acrytech System Specification, page 3 of 3
Appendix B: Technical Data Sheet, Acrytech Color, page 1 of 3
Appendix B: Technical Data Sheet, Acrytech Color, page 2 of 3
Appendix B: Technical Data Sheet, Acrytech Color, page 3 of 3
Appendix B: Technical Data Sheet, Acrytech ColorFlex, page 1 of 2
Appendix B: Technical Data Sheet, Acrytech ColorFlex, page 2 of 2
Appendix C: Technical Data Sheet, Acrytech Resurfacer, page 1 of 2
Appendix C: Technical Data Sheet, Acrytech Resurfacer, page 2 of 2
Appendix C: Technical Data Sheet, Acrytech Resurfacer Flex, page 1 of 2
Appendix C: Technical Data Sheet, Acrytech Resurfacer Flex, page 2 of 2
Appendix D: Technical Data Sheet, Latex-Based Primer & Sealer, page 1 of 2
Appendix D: Technical Data Sheet, Latex-Based Primer & Sealer, page 2 of 2
Appendix D: Technical Data Sheet, Solvent Primer, page 1 of 2
Appendix D: Technical Data Sheet, Solvent Primer, page 2 of 2
Appendix E: Technical Data Sheet, Acrytech Line Primer, page 1 of 1
Appendix E: Technical Data Sheet, Acrytech Line Paint, page 1 of 1
Appendix F: Safety Data Sheet, Acrytech Color, page 1 of 14
Appendix F: Safety Data Sheet, Acrytech Color, page 2 of 14
Appendix F: Safety Data Sheet, Acrytech Color, page 3 of 14
Appendix F: Safety Data Sheet, Acrytech Color, page 4 of 14
Appendix F: Safety Data Sheet, Acrytech Color, page 5 of 14
Appendix F: Safety Data Sheet, Acrytech Color, page 6 of 14
Appendix F: Safety Data Sheet, Acrytech Color, page 7 of 14
Appendix F: Safety Data Sheet, Acrytech Color, page 8 of 14
Appendix F: Safety Data Sheet, Acrytech Color, page 9 of 14
Appendix F: Safety Data Sheet, Acrytech Color, page 10 of 14
Appendix F: Safety Data Sheet, Acrytech Color, page 11 of 14
Appendix F: Safety Data Sheet, Acrytech Color, page 12 of 14
Appendix F: Safety Data Sheet, Acrytech Color, page 13 of 14
Appendix F: Safety Data Sheet, Acrytech Color, page 14 of 14
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 1 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 2 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 3 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 4 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 5 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 6 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 7 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 8 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 9 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 10 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 11 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 12 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 13 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 14 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 15 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 16 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 17 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 18 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 19 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 20 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 21 of 22
Appendix F: Safety Data Sheet, Acrytech ColorFlex, page 22 of 22
Appendix F: Safety Data Sheet, Acrytech Resurfacer, page 1 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer, page 2 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer, page 3 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer, page 4 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer, page 5 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer, page 6 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer, page 7 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer, page 8 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer, page 9 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer, page 10 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer, page 11 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer Flex, page 1 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer Flex, page 2 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer Flex, page 3 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer Flex, page 4 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer Flex, page 5 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer Flex, page 6 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer Flex, page 7 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer Flex, page 8 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer Flex, page 9 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer Flex, page 10 of 11
Appendix F: Safety Data Sheet, Acrytech Resurfacer Flex, page 11 of 11
Appendix F: Safety Data Sheet, Acrytech Latex-Based Primer & Sealer, page 1 of 14
Appendix F: Safety Data Sheet, Acrytech Latex-Based Primer & Sealer, page 2 of 14
Appendix F: Safety Data Sheet, Acrytech Latex-Based Primer & Sealer, page 3 of 14
Appendix F: Safety Data Sheet, Acrytech Latex-Based Primer & Sealer, page 4 of 14
Appendix F: Safety Data Sheet, Acrytech Latex-Based Primer & Sealer, page 5 of 14
Appendix F: Safety Data Sheet, Acrytech Latex-Based Primer & Sealer, page 6 of 14
Appendix F: Safety Data Sheet, Acrytech Latex-Based Primer & Sealer, page 7 of 14
Appendix F: Safety Data Sheet, Acrytech Latex-Based Primer & Sealer, page 8 of 14
Appendix F: Safety Data Sheet, Acrytech Latex-Based Primer & Sealer, page 9 of 14
Appendix F: Safety Data Sheet, Acrytech Latex-Based Primer & Sealer, page 10 of 14
Appendix F: Safety Data Sheet, Acrytech Latex-Based Primer & Sealer, page 11 of 14
Appendix F: Safety Data Sheet, Acrytech Latex-Based Primer & Sealer, page 12 of 14
Appendix F: Safety Data Sheet, Acrytech Latex-Based Primer & Sealer, page 13 of 14
Appendix F: Safety Data Sheet, Acrytech Latex-Based Primer & Sealer, page 14 of 14
Appendix F: Safety Data Sheet, Solvent Primer, page 1 of 16
Appendix F: Safety Data Sheet, Solvent Primer, page 2 of 16
Appendix F: Safety Data Sheet, Solvent Primer, page 3 of 16
Appendix F: Safety Data Sheet, Solvent Primer, page 4 of 16
Appendix F: Safety Data Sheet, Solvent Primer, page 5 of 16
Appendix F: Safety Data Sheet, Solvent Primer, page 6 of 16
Appendix F: Safety Data Sheet, Solvent Primer, page 7 of 16
Appendix F: Safety Data Sheet, Solvent Primer, page 8 of 16
Appendix F: Safety Data Sheet, Solvent Primer, page 9 of 16
Appendix F: Safety Data Sheet, Solvent Primer, page 10 of 16
Appendix F: Safety Data Sheet, Solvent Primer, page 11 of 16
Appendix F: Safety Data Sheet, Solvent Primer, page 12 of 16
Appendix F: Safety Data Sheet, Solvent Primer, page 13 of 16
Appendix F: Safety Data Sheet, Solvent Primer, page 14 of 16
Appendix F: Safety Data Sheet, Solvent Primer, page 15 of 16
Appendix F: Safety Data Sheet, Solvent Primer, page 16 of 16
Appendix F: Safety Data Sheet, Acrytech Line Primer, page 1 of 16
Appendix F: Safety Data Sheet, Acrytech Line Primer, page 2 of 16
Appendix F: Safety Data Sheet, Acrytech Line Primer, page 3 of 16
Appendix F: Safety Data Sheet, Acrytech Line Primer, page 4 of 16
Appendix F: Safety Data Sheet, Acrytech Line Primer, page 5 of 16
Appendix F: Safety Data Sheet, Acrytech Line Primer, page 6 of 16
Appendix F: Safety Data Sheet, Acrytech Line Primer, page 7 of 16
Appendix F: Safety Data Sheet, Acrytech Line Primer, page 8 of 16
Appendix F: Safety Data Sheet, Acrytech Line Primer, page 9 of 16
Appendix F: Safety Data Sheet, Acrytech Line Primer, page 10 of 16
Appendix F: Safety Data Sheet, Acrytech Line Primer, page 11 of 16
Appendix F: Safety Data Sheet, Acrytech Line Primer, page 12 of 16
Appendix F: Safety Data Sheet, Acrytech Line Primer, page 13 of 16
Appendix F: Safety Data Sheet, Acrytech Line Primer, page 14 of 16
Appendix F: Safety Data Sheet, Acrytech Line Primer, page 15 of 16
Appendix F: Safety Data Sheet, Acrytech Line Primer, page 16 of 16
Appendix F: Safety Data Sheet, Acrytech Line Paint, page 1 of 16
Appendix F: Safety Data Sheet, Acrytech Line Paint, page 2 of 16
Appendix F: Safety Data Sheet, Acrytech Line Paint, page 3 of 16
Appendix F: Safety Data Sheet, Acrytech Line Paint, page 4 of 16
Appendix F: Safety Data Sheet, Acrytech Line Paint, page 5 of 16
Appendix F: Safety Data Sheet, Acrytech Line Paint, page 6 of 16
Appendix F: Safety Data Sheet, Acrytech Line Paint, page 7 of 16
Appendix F: Safety Data Sheet, Acrytech Line Paint, page 8 of 16
Appendix F: Safety Data Sheet, Acrytech Line Paint, page 9 of 16
Appendix F: Safety Data Sheet, Acrytech Line Paint, page 10 of 16
Appendix F: Safety Data Sheet, Acrytech Line Paint, page 11 of 16
Appendix F: Safety Data Sheet, Acrytech Line Paint, page 12 of 16
Appendix F: Safety Data Sheet, Acrytech Line Paint, page 13 of 16
Appendix F: Safety Data Sheet, Acrytech Line Paint, page 14 of 16
Appendix F: Safety Data Sheet, Acrytech Line Paint, page 15 of 16
Appendix F: Safety Data Sheet, Acrytech Line Paint, page 16 of 16
Appendix G: Acrytech Color Chart, page 1 of 2
Appendix G: Acrytech Color Chart, page 2 of 2
Appendix H: Acrytech Mixing Chart, page 1 of 1
Appendix I: ITF Court Pace Classification Certificate, page 1 of 1
Appendix J: Firefly Sports Surface Performance Testing, page 1 of 1
Appendix K: H.B. Fuller Weathering & Scrub Testing, page 1 of 8
Appendix K: H.B. Fuller Weathering & Scrub Testing, page 2 of 8
Appendix K: H.B. Fuller Weathering & Scrub Testing, page 3 of 8
Appendix K: H.B. Fuller Weathering & Scrub Testing, page 4 of 8
Appendix K: H.B. Fuller Weathering & Scrub Testing, page 5 of 8
Appendix K: H.B. Fuller Weathering & Scrub Testing, page 6 of 8
Appendix K: H.B. Fuller Weathering & Scrub Testing, page 7 of 8
Appendix K: H.B. Fuller Weathering & Scrub Testing, page 8 of 8
Appendix K: VOC Calculation, EPA Method 24, page 1 of 1
Appendix K: Solar Reflectance Test Results, page 1 of 1
Appendix L: Concrete Design & Preparation, page 1 of 2
Appendix L: Concrete Design & Preparation, page 2 of 2
Appendix M: New Court Surface Maintenance, page 1 of 1
Appendix N: Acrytech Limited Warranty (two-year), page 1 of 2
Appendix N: Acrytech Limited Warranty (two-year), page 2 of 2